System Info - U-Reach NV-BM Serie Manual Del Usuario

The firmware update process may take longer than 5 minutes. Please do not
Caution
disrupt power or process during BIOS update. If interrupted, the system will
become useless. U-Reach will not be held responsible for any damages.

5.3 System Info

This function will display basic information such as device model, name, capacity, etc...
Scroll to select "5.3 System Info", then press "OK" to view the connected device(s). Then
scroll through to view all information.
5.4 Burn SSD Firmware
Allows user to do firmware updates for compatible SSDs.
Note
Contact a U-Reach technical team for details.
Step 1: Prepare a USB drive for update.
Connect a USB drive to PC. Locate the desired BIOS file and save it to the root directory of
the USB drive.
Note
The USB's format must be: FAT16 or FAT32.
Step 2: Proceed to update firmware
Connect USB drive to the USB port on the front side of the duplicator. Scroll to select "5.4.2
Burn FW -> SSD Slot1" or "5.4.3 Burn FW -> ALL Slot", then press "OK" to start the firmware
update process.
The firmware update process may take longer than 5 minutes. Please do not
Caution
disrupt power or process during BIOS update. If interrupted, the device will
become useless. U-Reach will not be held responsible for any damages.
5.5 Calc. CRC64
This function will count the CRC64 value for the source port. The CRC64 value is an easy way
to double check the source data is correct.
User is responsible for verification of targets' quality. Testing a few completed
Caution
targets in a mass production environment for quality control is recommended.
16