U-Reach NV-BM Serie Manual Del Usuario página 22

Scroll to select "6.6.3 Erase Pattern", then press "OK". Then scroll through to select one of
two settings.
One Byte
Random character written per byte.
Scroll to select "One Byte", then press "OK" to save this setting.
Big Random Data
Random character written in a set of area.
Scroll to select "Big Random Data", then press "OK" to save this setting.
6.6.4 Skip Erase Errors
Skip source bad sectors during Erase. Bad sectors can be set as unlimited or at a value from
0 to 65,535.
Scroll to select "6.6.4 Skip Erase Errors", and press "OK" to scroll through the available
values for skipping bad sectors.
6.6.5 HPA Copy Mode
Scroll to select "6.6.5 HPA Cody Mode", then press "OK" to view the submenus. The default
setting is: "Copy and Setting".
❶ Do Not Copy HPA
This menu contains submenu settings from which users can select.
Scroll to select " HPA Copy Mode >> Do Not Copy HPA", then press "OK" view submenu
settings.
Keep Target HPA
Does not copy HPA data, but keeps target device 's original HPA setting.
Scroll to select "Keep Target HPA", then press "OK" to save this setting.
Clear Target HPA
Does not copy HPA data and clears target device's HPA setting.
Scroll to select "Clear Target HPA", then press "OK" to save this setting.
❷ Setting Target HPA
Copies HPA setting from source device to target.
Scroll to select " HPA Copy Mode >> Setting Target HPA", then press "OK" to save this
setting.
❸ Copy and Setting
Copies HPA setting and data from source device to target.
Scroll to select " HPA Copy Mode >> Copy and Setting", then press "OK" to save this setting.
22