Control Panel - Black and Decker BD22MWSA Manual De Instrucciones

SET UP & USE

CONTROL PANEL

Pump
Button
(Model
BD50PMWSA only)
Error Codes and Protection Code:
• AS-Humidity sensor error--Unplug the unit and plug it back in. If error repeats,
call for service.
• ES-Tube Temperature sensor of the evaporator error--Unplug the unit and plug
it back in. If error repeats, call for service.
• P2-Bucket is full or bucket is not in right position--Empty the bucket and
replace it in the right position.(only available for the unit with no pump feature.)
• Eb-Bucket is removed or not in right position-- Replace the bucket in the right
position.(only available for the unit with pump feature.)
NOTE: When one of the above malfunctions occurs, turn off the unit, and check
for any obstructions. Restart the unit, if the malfunction is still present,
turn off the unit and unplug the power cord. Contact the manufacturer or
its service agents or a similar qualified person for service.
Page 8
Auto defrost
LED Indicator
Comfort Continuous
Button Button
Filter
Button
Timer ON
LED Indicator
Bucket Full Timer OFF
LED Indicator LED Indicator
Timer
Button
Turbo Decrease
Button Room
Humidity Level
Digital
Humidistat
Display
Increase Room
Humidity Level
Power
Button