ProMed 4030 SX Manual De Instrucciones página 29

I
NSTALLATION
the grip (centrifugal lock), simply insert the bit into the chuck
as far as it will go. Remove the bit by simply pulling it out in
a straight motion. Never insert or remove a bit using force!
Only use bits
of 2,32 - 2,35 mm
Professional filing bits fit precisely into the connector without
you having to use excessive force. When removing a bit,
please switch off the motor.
Only use bits with a maximum head diameter of 8 mm
(POM hand unit) or 12 mm (Aluminum hand unit).
Please remember that oversized bits may only be used at a
maximum rotation speed of 10.000 rpm. At higher speeds
they will run off-center (strong vibrations in the hand unit)
and the chuck or bit may be damaged.
with a shaft diameter
!
Caution:
Never use bits that are deformed, damaged or non-con-
centric. Only use bits with a maximum head-Ø of 8 mm.
Always keep to the maximum speed quoted by the bit's
manufacturer. If in doubt, always use the bit manufacturer's
specifications as a guide. Always wear suitable protective
goggles.
DE
US
FR
IT
ES
US NL
RU
PL
SE
FI