Descargar Imprimir esta página

fisair DFRA Serie Manual Del Usuario página 10

Ocultar thumbs Ver también para DFRA Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

General
If you notice a malfunction or detect power failure, turn the unit off immediately and
ensure it cannot start up again.
Problems must be fixed immediately.
Use properly qualified personnel to carry out repair work, thus ensuring the safe
operation of the unit.
Use only original FISAIR spare parts.
Refer to any local regulations that restrict or regulate the use of this dehumidifier.
Operation of the unit
Do not compromise the safety of the unit.
Periodically check the protection and warning devices.
The safety equipment of the unit must not be removed or left out of service.
Installation, Disassembly, Maintenance and Repair of the Unit
The machine must not be tampered with when in operation.
Turn off power to the unit when maintenance or repairs are being performed.
Do not upgrade or install additional equipment on the unit without prior written approval
from FISAIR.
The I1 isolator switch must be placed in the "0"
position and locked out with a padlock to access
the fan plenum and/or perform any maintenance
action within the unit.
For maintenance work on equipment with a gas or steam heater, the fuel gas or steam
feed valve must be fitted with a LOTO device:
Fisair supplies the LOTO device attached to the dehumidifier
in gas reactivation equipment, in compliance with regulation
(EU) 2016/426. Make sure you have received it before
installing the equipment, and once installed keep it ready for
use.
In steam reactivation equipment, the LOTO device is supplied
as an option.
User Manual DFRA Series | 10

Publicidad

loading