Air Purifier Controls; Changing The Filter - Filtrete FAP-TT-ADH Manual De Instrucciones

AIR PURIFIER CONTROLS
Plug the air purifier into a 120V AC electric outlet, then slide the control slider to
the right to your preferred fan speed. To turn the air purifier OFF, slide the control
slider all of the way to the left.
Adjusting Fan Speed
This air purifier has 3 fan speeds that are printed near the control slider. The
lowest fan speed is indicated with 1 dot. Medium speed is indicated with 2 dots.
High speed is indicated with 3 dots.
Filter Change Indicator
This air purifier is equipped with an electronic filter change indicator. This indicator
monitors the use of the filter to signal when the filter needs to be changed. The
indicator light will turn on in an orange color when the filter has 10% life remaining.
The light will then turn red when the filter life is 0% indicating the filter needs to
be changed. Once you have changed the filter in the air purifier, reset the filter
change indicator by holding the RESET button for 3 seconds.

CHANGING THE FILTER

When to change:
The table below provides an estimated filter life based on the number
of hours of daily use, with seven days per week operation.
Depending upon the conditions in your home, the filter may need to be changed
more frequently. Using the air purifier in environments with tobacco smoke, candle
burning, construction work, sanding projects, wood burning stove or fireplace
smoke, or pets in the home may decrease the filter's life. The filter should be
periodically checked for damage or blockage.
Daily Use 6 hours 12 hours 24 hours
Filter Life 12 months 6 months 3 months
8