Storage And Transport - FITFIU FITNESS MC-560 Manual Usuario

Problem
E08: Control board
anomaly
E10: Motor anomaly

STORAGE AND TRANSPORT

FOLDING AND TRANSPORTING
1
3
STORAGE
Store equipment in a clean, dry, indoor location. Never leave or use the unit outdoors. Make sure the main power
switch is turned off and the power cord is disconnected from the wall outlet.
Cause
The control board is not connected.
The motor is damaged or a moving
part of the treadmill is jammed and,
therefore, the motor cannot rotate
correctly.
Check the top and middle wires to see if the
control board is connected. If the cable has
been punctured or damaged, you will need
to replace it. If the problem is not solved, the
control board may need to be replaced.
Torque is too great, adjust the torque to be
less.
Inspect the moving parts of the treadmill to
make sure they are working properly.
Replace the motor if necessary.
Lubricate the treadmill.
2
4
60
Solution