SEVERIN RB 7026 Instrucciones De Uso página 22

Emptying the dust container
1. Empty the dust container after each vacuuming operation!
2. Make sure that the appliance is switched off.
3. Open the lid of the appliance and reach with your thumb and middle finger into the two openings of the dust container.
The lock is released and the dust container can be removed from the appliance.
4. Press the side lock
5. Empty the dust container and thoroughly tap out the filter in the flap. If necessary, use a vacuum cleaner.
6. Close the lid again and insert the dust container into the appliance. Close the lid.
If necessary, clean dust container and filter wet:
1. Empty the dust container as indicated above.
2. Remove the two filters from the dust container flap.
3. Carefully brush or vacuum the lamellar filter.
4. The foam filter can be cleaned carefully under warm water. Do not use hot water or cleaning agents!
5. Allow filter and dust container to air dry for 24 hours.
6. After the individual parts are completely dry, first insert the foam filter and then the lamellar filter back into the dust
container flap.
7. Insert the dust container into the appliance. Close the lid.
22
and open the dust container door.