Helpful Hints And Tips - Selecline DD1-21-4 Manual De Utilización

Problem
Unusual noises.
If the malfunction shows up again, contact the Service Center.
This information is provided to assist with resolving issues quickly and correctly.
Refer to the rating plate and write any relevant information down where it will be
handy.

HELPFUL HINTS AND TIPS

Hints for Freezing
To help you make the most of the freezing process, here are some important hints:
■ The maximum amount of food that can be frozen in a 24-hour period is shown
on the appliance rating plate.
■ The freezing process takes 24 hours. No additional food should be added during
this time.
■ Only freeze high quality, fresh, and thoroughly cleaned foodstuffs.
■ Prepare food in small portions to make it easier to freeze evenly, rapidly, and
completely. It also makes it easier to unthaw only the amount required, later.
■ Wrap the food in aluminium foil or polythene and ensure the packages are
airtight.
■ Do not allow fresh food to rest against food that is already frozen. This avoids a
rise in temperature in the frozen food.
■ Lean foods store better and longer than fatty foods. Salt reduces the storage life
of food.
■ Water ices. If consumed directly after being taken from the freezer, ice can cause
freezer burn to the skin.
■ It is advisable to show the freezing date on individual packages stored in the
freezer. This aids you in tracking how long food has been in the freezer.
Hints for the Storage of Frozen Food
To help you obtain the best performance from this appliance, here are some
important hints:
■ Make sure that the commercial frozen foodstuffs were adequately stored by the
retailer.
■ Be sure that frozen foodstuffs are transferred from the store to the freezer in the
shortest possible time.
■ Do not open the appliance door frequently. Do not leave the appliance door
open longer than absolutely necessary.
Possible Cause
Appliance is not level.
The appliance is
touching the wall or
other objects.
A component, such
as a pipe, on the rear
of the appliance is
touching another part
of the appliance or the
wall.
17
Solution
Re-adjust the levelling
feet.
Move the appliance
slightly until it is
standing clear.
If necessary, carefully
bend the component
out of the way.