cleanAIR Shigematsu CF02 Manual Del Usuario página 5

Ocultar thumbs Ver también para Shigematsu CF02:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 75
Instructions for use
WARNING
1.
Do not modify or distort the mask and refrain from exerting excessive force on the mask.
2.
Do not disassemble or modify the face parts.
3.
Use only original spare and consumable parts.
4.
Do not use if:
• You have a beard, hair or sideburns reaching into the sealing line of the mask. The requested
protection function of the mask cannot be achieved under such circumstances.
• You are in a poor physical condition.
5.
Individuals with respiratory or circulatory system disease should consult a physician and go
through a medical examination before use.
6.
Give your attention to checking the product before use.
7.
Perform an air-tightness test whenever putting on the respirator.
8.
Do not insert towels or any other objects that could cause air-tightness disruption in the space
between the face and the mask sealing line.
9.
If any of the following problems occur when using the mask, move to a secure location and take
appropriate measures:
• Resistance to breathing increased significantly or you have problems with breathing.
• If you experience stench or irritation or an unpleasant taste while breathing.
• If you feel unwell or if you experience nausea.
10. Use only authorized CleanAIR
not protect the user against gases and vapours. Gas filters do not protect the user against
any particles. Use combined filters in case of contamination by both kinds of dangerous sub-
stances.
11.
Do not use filters with expired shelf lives. (see section „11 Shelf life").
12. Do not use filters that are damaged, malformed, corroded or otherwise.
NOTICE
1.
In case of allergic reactions (i.e. rash, redness, itching, etc.) while using this product stop using
it and consult a dermatologist.
2.
This product is intended to be used in environments with temperature range from -5 °C to +50 °C.
Standards
This product conforms to:
EN 136:1998/AC:1999-12
EN 12942:1998/A2:2008
EN 14594:2005
Notified person for the CE approval:
Výzkumný ústav bezpečnosti práce, v.v.i.
Jeruzalémská 9, 116 52 Prague 1, Czech Republic
Authorised person 235
Notified person 1024
filters suitable for the particular application. Particle filters do
®
CL 3.
TM3
4B
CF02 Full-Face Mask
ENG
5

Publicidad

Tabla de contenido
loading

Tabla de contenido