Setup; Installation / Assembly - Aquatec Pure Bidet Manual Del Usuario

4 Setup

4.1 Installation / Assembly

Assembling the shower toilet
The Aquatec® Pure Bidet fits standard and
norm-WC's.
WARNING!
Risk of being scalded by hot water
– Only connect the shower toilet to a cold water
supply.
WARNING!
– Check all the accessory parts are in place.
– Do not connect the power until installation is
finalized.
The shower toilet is suitable for all types of water
supply connection with a flushing cistern (top,
bottom, sideways).
If the T-valve does not fit onto the water supply,
adapter pieces are necessary.
1590625-C
All manuals and user guides at all-guides.com
C
B
1. Unfasten the fixation nuts B of the existing toilet seat
A underneath the toilet bowl.
2. Remove the toilet seat and keep it with the fixation
parts B and C for later use.
A
1. Close the shut off valve A clockwise.
2. Drain toilet water tank completely by flushing.
Setup
A
11