Using The Shower Toilet - Aquatec Pure Bidet Manual Del Usuario

Aquatec® Pure Bidet
Overview of key functions on remote control
Pos. Key name
S HIGH / LOW
BATTERY SIGN
U
Overview of key functions on control panel
Pos. Key name
K CLEANSING/STOP
POWER SAVING
L
LIGHT
M
LIGHT SENSOR
N
POWER
O
LIGHT
P
18
All manuals and user guides at all-guides.com
Function
Display of current water
temperature or seat
temperature
Illuminates when batteries
need to be replaced
Function
Device turns off
Power-saving mode activates
Night-light activates
When night-light function is
activated, bidet automatically
senses toilet light and
night-light LED switches on
Illuminates when unit is
switched on
Illuminates when night-light
is activated
Overview of key functions on control panel
Pos. Key name
AUTO
Q
SUPER
R

5.3 Using the shower toilet

Perform manual cleansing
A sensor is located inside the toilet seat, that is only
activated by skin contact.
1. If plugged-in, the device is turned on and the "POWER"
LED O illuminates on the control panel.
• If the "POWER" LED does not illuminate, press any
button on the remote control (except HIGH/LOW
or FRONT/BACK buttons).
2. Set yourself centered on the toilet seat.
3. Press the CLEANSING/MOVE button C or BIDET/MOVE
button D.
• CLEANSING respectively BIDET-function is
performed.
4. Press again CLEANSING/MOVE button or BIDET/MOVE
button during the cleansing process.
• The cleansing nozzle moves back and forth. Nozzle
stops by pressing the button again.
Function
Illuminates when automatic
power-saving mode is
activated
Illuminates when super
power-saving mode is
activated
1590625-C