DJ-Tech iDance Zero Manual De Instrucciones página 5

Section 1
9. Play/pause button - Press this button to toggle the Play/ Pause action of the sampler.
10. Sampler ON button - Use this button to select sampler source for sample making.
11. Effect ON button - Use this button to select desired channel to be passed to effect processor.
Section 2
12. Channel Gain - Used to adjust the input level for each channel.
13. EQ - Adjusts the high/mid and low frequency levels of the input channels for good sound.
14. Channel fader - Adjust the volume for CH1 and CH2.
15. Crossfader - Used to mix the sound from the 2 channels.
16. Cue button - Sends the channel signal to headphones for monitoring. As well as the sampler signal.
17. Source input selector switch - These switches are used to select the input source assigned to each channel.
Each channel may only be assigned one input source at the same time.
18. C.F curve - Used to select the rising curve patterns for the crossfader function.
• When switch to left position, a slowly rising curve response is selected
• When switch to center position, a middle rising curve response is selected
• When switch to right position, a rapidly rising curve response is selected
Section 3
19. Master Volume - Used to control the volume of the master output.
20. Key ON/OFF - Used to toggle ON/OFF the Pitch Shifting function on the Channel passing through the effect
processor.
21. Pitch Fader - Used to set the amount of pitch shifting. 0% pitch shift when the fader is at the middle position.
22. Key Range - Used to switch between the ranged (4%, 8% and 16%) for Pitch Shifting.
23. Adjustable Universal iPod docking - Adjust (with a coin) to corresponding position to fit different version of iPods.
24. 30-Pin iPod Connector - Connected to iPod. Please make sure the iPod is inserted completely to the connector.
25. Previous/ Next Buttons - Press to select the previous/ next song in iPod.
26. FF/ FB Buttons - Press to enable Fast-Forward or Fast-Backward action on the playing song.
27. Menu - The same function as the Menu button in iPod
28. Play/ Pause - The same function as the Play/ Pause button in iPod
29. Search Encoder - Used to simulate the function Click Wheel in iPod. It can be used to scroll up/down in the menu
by turning this encoder. Users can also press the encoder for a confirmation action.
All manuals and user guides at all-guides.com
5