Trouble Shooting - Prorelax TENS Manual De Instrucciones

Trouble Shooting

Always check the unit and accessories before use to prevent damage and defects;
these are some of the simple checks:
1. Make sure the battery has sufficient charge and is not corroded.
2. M ake sure the cables fit tightly into the connection sockets of the device.
The table below shows some common defects. If you cannot remedy the defects
as described, contact your nearest customer service centre.
Defect
The device does not
turn on
The device turns on and
then off again
The device turns on,
but does not generate
electric pulses
The unit does not turn
on even though new
batteries have been
inserted
All manuals and user guides at all-guides.com
Cause
No battery or bad battery
Battery not inserted properly
Battery life expired
Cable broken
Cable not connected properly,
Treatment time has expired
16
Trouble Shooting
Remedy
Replace battery
Insert battery again
Replace battery
Contact customer Service
Contact customer Service
Connect cable properly. Switch unit to
the OFF position and turn it back on
Contact customer service