Steren AMP-005 Manual Del Usuario página 5

USING THE AMPLIFIER
1.- Make sure the amplifi er has new batteries or with enough
energy.
2.- Plug the microphone to MIC IN input. Screw the connector on
to fasten it.
3.- Power on the amplifi er. The Power LED will light on.
4.- Speak through the microphone, raise the volume level
gradually.
5.- After their use, power the device off.
This equipment will work for 6 to 8 hours with new or fully This equipment will work for 6 to 8 hours with new or fully
charged batteries. charged batteries.
SPECIFICATIONS
Input:
Speaker cone:
Impedance:
Output:
Condensed microphone:
AC adapter
Input:
Output:
Recharge current:
Weight:
Dimensions:
Product design and specifi cations are subject to change, Product design and specifi cations are subject to change,
without notice. without notice.
9V (AAx6)
2,5"
4ohms
5W max.
680ohms
120V~ 60Hz
12V
70mA – 150mA
390g
180x80x65,5mm
ENGLISH-5
15W
300mA