Optional; Notification; Declaration Of Conformity - Marmitek IR Control 10 Modo De Empleo

7 Optional

Extra IR receiver (Art. nr. 08142)
Every system needs at least one IR receiver (up to 6). With an extra IR receiver you
can also operate your A/V devices from another room. See datasheets of the IR
receivers at www.marmitek.com
IR extension cable with one blaster LED (Art. nr. 08144)
An IR blaster radiates much more infrared light (even up to 2 meters) so it can operate
multiple devices. Placement of the IR blaster is a lot less critical as opposed to IR
LEDs. See datasheets of the IR Blaster LED on www.marmitek.com.
IR extension cable with two emitter LEDs (Art. nr. 08145)
The LEDs of the IR extension cables with 2 emitter LEDs have to be stuck to the A/V
device(s) you want to operate. See datasheets of the IR emitter LEDs on
www.marmitek.com.

8 Notification

8.1 Declaration of Conformity

Hereby, Marmitek BV declares that this IR Control 10™ is in compliance
with the essential requirements and other relevant provisions of the
following Directives:
Directive 2014/30/EU of the European Parliament and of the Council of 26 February
2014 on the harmonisation of the laws of the Member States relating to
electromagnetic compatibility (recast)
Directive 2014/35/EU of the European Parliament and of the Council of 26 February
2014 on the harmonisation of the laws of the Member States relating to the making
available on the market of electrical equipment designed for use within certain voltage
limits.
Directive (EU) 2017/2102 of the European Parliament and of the Council of 15
November 2017 amending Directive 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down Ecodesign
requirements for external power supplies pursuant to Directive 2009/125/EC of the
European Parliament and of the Council and repealing Commission Regulation (EC)
No 278/2009.
You can read the full Declaration of Conformity at
IR Control 10™
http://www.marmitek.com
11