Set The Clock Manually; Time Zone Setting - Explore Scientific RDP3007 Manual De Instrucciones

NOTE: When using a power adapter, please increase
the separation of the main unit and the power adapter
to avoid interference of RCC signal receiving.

SET THE CLOCK MANUALLY

1. Press and hold [
date setting.
2. The setting parameter will flash.
3. Press [ ] button once, the figure will increase 1 unit
(when setting minute, second will reset to 0). Press
and hold the [ ] button, the figures will increase
rapidly.
4. Press [ ] button once, the figure will decrease 1 unit
(when setting minute, second will reset to 0). Press
and hold the [ ] button, the figures will decrease
rapidly.
5. Press [ ] button to confirm setting and enter to
next parameter.
6. Sequence of setting: Time Zone  12/24 Hr format
 Hour  Minute  Year  Calendar Mode (day-
month/month-day)  Month  Day  Weekday
Language  °C/°F  Exit
] button to enter into time and
7. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
LANGUAGE
The Language options are: English (E), German (D) 
French (F)  Italian (I)  Spanish (S)

TIME ZONE SETTING

To set a different time zone, proceed as follows:
1. Press and hold [
setting.
2. The Time zone offset setting will flash.
3. Press the [ ] button to increase or [ ] button to
decrease the Time zone offset.
°C/°F SETTING
1. Press and hold [
setting.
2. Press [ ] button several times until the display
shows °C/°F.
3. Press the [ ] or [ ] button to switch Celsius (°C) /
Fahrenheit (°F).
] button, enter time and date
] button, enter time and date
EN
IT
DE
FR
ES
9