Super Ego SEH003500 Manual Del Usuario página 12

Intended use
This impact drill is intended for the drilling of
concrete, stone and brick. The general drill operation
is for wood, ceramic, plastic, and metal working, as
well as tightening and loosening screws.
Only adults may use this tool.
Any other usage is inappropriate.
Altering the power tool, or using parts which were
not reviewed or approved by the manufacturer, are
also inappropriate.
There could be unpredictable damage to people and
objects with inappropriate usage. The manufacturer
assumes no responsibility for damages resulting from
inappropriate usage.
Document explanation
Read through the safety advices carefully. Pay
attention to the corresponding symbols and their
meanings.
Do not change the sequence of the individual steps in
the construction manual.
Do not leave out any steps in the construction
manual. Pay close attention to the special safety
advices before instructions.
These are conspicuously marked by the symbol for
"Attention" or "Danger".
Symbols used
Attention/
Danger
Dust mask
needed
Note
Safety advice
WARNING!
Read all instructions. Failure to follow
all instructions listed below may result
in electric shock, fire and/or serious injury. The term
"power tool" in all the warnings listed below refers
to your mains operated (corded) power tool or
battery operated (cordless) power tool...
Save these instructions!
12
1. WORK AREA
2. ELECTRICAL SAFETY
Ear
protection
needed
Eye
protection
needed
3. PERSONAL SAFETY
Protective
clothing
needed
ENGLISH
− Keep work area clean and well lit. Cluttered
and dark areas incite accidents.
− Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
− Power tools create sparks which may ignite
the dust or fumes.
− Keep children and bystanders away while
operating a power tool.
− Distractions can cause you to lose control.
− Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
− Unmodified plugs and matching outlets will
reduce risk of electric shock.
− Avoid body contact
grounded surfaces such as pipes, radiators,
ranges and refrigerators.
− There is an increased risk of electric shock if
your body is earthed or grounded.
− Do not expose power tools to rain or wet
conditions.
− Water entering a power tool will increase
the risk of electric shock.
− Do not abuse the acord. Never use the cord
fora carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts.
− Damaged or entangled cords increase the
risk of electric shock.
− When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
− Use of a cord suitable for outdoor, use
reduces the risk of electric shock.
− Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
− A moment of inattention while operating
power tools may result in serious personal
injury.
− Use safety equipment.
protection.
− Safety equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
− Avoid accidental starting. Ensure the switch
is in the off position before plugging in.
− Carrying power tools with your finger on the
with earthed or
Always wear