Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Customer Assistance - Bosch GPL 5 C Professional Manual Original

All manuals and user guides at all-guides.com
OBJ_BUCH-847-001.book Page 23 Friday, May 29, 2009 7:50 AM
Projecting Plumb Points to the Ceiling
(see figures I – J)
Select one of the operating modes with plumb
crosses. Direct the cross point of the bottom
laser line onto the plumb point subject to pro-
jecting. Mark the cross point of the upper laser
line onto the ceiling. In the same manner, points
from the ceiling can be projected onto the floor.
When mounting metal profiles for framing work,
attach the measuring tool via both magnets 5
against a mounted profile. Measure the distance
from the cross point of the laser lines to the
edge of the profile. Project the distance to the
opposite metal profile on the ceiling or the floor
respectively.
Marking Right Angles (see figure K)
Select the "plumb crosses and laser points"
operating mode. Align the measuring tool with
the cross point of the laser lines against the ref-
erence point, from where the right angle shall
begin. Mark both legs of the angle alongside the
laser lines.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in
the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or
other fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit opening
of the laser in particular, and pay attention to
any fluff of fibres.
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorised
after-sales service centre for Bosch power tools.
Do not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the measuring tool.
In case of repairs, send in the measuring tool
packed in its protective pouch 12.
Bosch Power Tools
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can answer
your questions concerning possible applications
and adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
1 609 929 S06 | (29.5.09)
English | 23