Technical Data - OHAUS Valor 7000 Serie Manual Del Usuario

TM
Valor 7000 Series

5.TECHNICAL DATA

The technical data is valid under the following ambient conditions:
Indoor use only
Operating temperature: -10° C to 40° C
Relative humidity: 20% to 85% relative humidity, non-condensing
Altitude: Up to 2000 m
Power: AC power 100-240V 50/60 Hz, internal rechargeable sealed lead-acid battery
Current rating: 0.5A
Mains supply voltage fluctuations: up to ± 10% of the nominal voltage
Installation category: II
Pollution degree: 2
Specifications:
MODEL
Capacity x Readability
(Max x d non-approved)
Maximum Displayed
Resolution
Capacity x Readability
(Max x e approved)
Approved Resolution
Repeatability
Linearity
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
Verified weighing instruments
When the instrument is used in trade or a legally controlled application it must be set up, verified and sealed in accordance
with local weights and measures regulations. It is the responsibility of the purchaser to ensure that all pertinent legal
requirements are met.
Weighing Instruments verified at the place of manufacture bear the following supplementary metrology marking on the
descriptive plate.
Weighing Instruments to be verified in two stages have no supplementary metrology marking on the descriptive plate. The
second stage of conformity assessment must be carried out by the applicable weights and measures authorities.
If national regulations limit the validity period of the verification, the user of the weighing instrument must strictly observe the
re-verification period and inform the weights and measures authorities
As verification requirements vary by jurisdiction, the purchaser should contact their local weights and measures office if they
are not familiar with the requirements.
V71P1502T
1.5 kg x 0.00005 kg 3 kg x 0.0001 kg
1500 g x 0.05 g 3000 g x 0.1 g
3 lb x 0.0001 lb 6 lb x 0.0002 lb
48 oz x 0.002 oz 96 oz x 0.005 oz
1.5 kg x 0.0005 kg 3 kg x 0.001 kg
1500 g x 0.5 g 3000 g x 1 g
3 lb x 0.001 lb 6 lb x 0.002 lb
48 oz x 0.02 oz 96 oz x 0.05 oz
0.0001 kg
0.0001 kg
V71P3T V71P6T
6 kg x 0.0002 kg
6000 g x 0.2 g
15 lb x 0.0005 lb
240 oz x 0.01 oz
1:30000
6 kg x 0.002 kg
6000 g x 2 g
15 lb x 0.005 lb
240 oz x 0.1 oz
1:3000
0.0002 kg 0.0005 kg
0.0002 kg 0.0005 kg
V71P15T
15 kg x 0.0005 kg 30 kg x 0.001 kg
15000 g x 0.5 g 30000 g x 1 g
30 lb x 0.001 lb 60 lb x 0.002 lb
480 oz x 0.02 oz 960 oz x 0.05 oz
15 kg x 0.005 kg 30 kg x 0.01 kg
15000 g x 5 g 30000 g x 10 g
30 lb x 0.01 lb 60 lb x 0.02 lb
480 oz x 0.2 oz 960 oz x 0.5 oz
0.001 kg
0.001 kg
EN-5
V71P30T
0.002 kg
0.002 kg