Controlling Another Cd Player (Advanced Mega Control) - Sony CDP-CE545 Manual De Instrucciones

Playing CDs
Checking the track order
You can check your program before or after you start
playing.
Press CHECK.
Each time you press this button, the display shows the
track (the disc and track numbers) or the disc (the disc
number and "AL" indication) of each step in the
programmed order. After the last step in the program,
the display shows "END" and returns to the original
display. If you check the order after you start playing,
the display shows only the remaining steps.
Changing the track order
You can change your program before you start playing.
To
Erase a track
Erase the last track in the
program
Add tracks to the end of the
program
Erase the whole program
completely
18 GB
You need to
Press CHECK until the track
you don't want appears in
the display, then press
CLEAR.
Press CLEAR. Each time you
press the button, the last
track will be cleared.
Follow the programming
procedure.
Hold down CLEAR until
"CLEAR" appears in the
display. Create a new
program following the
programming procedure.
Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
"Connecting Another CD Player" on pages 6 and 7).
Even when a second CD player is connected, the
controls on both of the units will function. When you
press the play button on either unit, the operating
player stops and the resting player starts.
Note that depending on the player, you may not be
able to operate all the functions of the second CD
player.
The controls indicated in the illustration below are effective
while the MEGA CONTROL button is lit.
Play mode buttons (CONTINUE/
SHUFFLE/PROGRAM/REPEAT)
MENU MEGA CONTROL
Playing discs of the second CD player
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up and the
display shows the current disc number of the
second player.
Current disc number
ALL DISCS
DISC
* D I S C - 1 *
2
Select the play mode you want.
To program tracks, use the controls on the second
player.
3
Press H to start playing.
The play starts and the display shows the current
disc and track numbers and the playing time of the
track.
While the MEGA CONTROL button is lit, you can
control the second player with the controls on this
player as follows:
AMS
l L
(DISC)
H X x
m ( –AMS+) M
CD1