Safety Warning; Technical Assistance Service - S&P 3MCN Instrucciones De Montaje Y Uso

Adj. ANTI-FREEZE mode
Adj. TIMER mode
NOTE: When no symbol is flashing, the temperature shown on the screen is the
ambient temperature in the room. If the user wishes to consult the
programmed COMFORT temperature, they only have to press the MODE
key. The screen will return to its initial state immediately.

SAFETY WARNING

If any anomaly is produced, the overheating disconnection system will operate
and disconnect the apparatus. If this should happen, carry out the following steps:
- Stop the apparatus by turning the On/Off switch to position (0).
- Leave the apparatus to cool down for some 30 minutes.
- Ensure that there is nothing obstructing the free circulation of air.
- Return the On/Off switch to position (I).
- If having followed these steps the controls do not function correctly, please
contact the S&P Official Service Dept.
- If having followed these steps the controls do not function correctly, please
contact the S&P Official Service Dept.
MAINTENANCE
The S&P MN Series of electric radiators Do Not Require any special maintenance.
1. IMPORTANT: BEFORE CONDUCTING ANY MAINTENANCE OR
CLEANING ENSURE THAT THE APPLIANCE IS
DISCONNECTED FROM THE MAINS ELECTRICAL SUPPLY .
2. To ensure long and trouble free operation we recommend that the radiator is
periodically checked to ensure there is no build up of dust and debris.
3. To clean the appliance simply wipe with a damp (not wet) cloth.
4. Always clean the product when it is cold. Do Not Use any abrasives or solvents.

TECHNICAL ASSISTANCE SERVICE

All MN electric oil filled radiators are offered with a comprehensive guarantee and
Technical Assistance Service. If the appliance is found to be defective within the
period of guarantee then first please contact the Technical Assistance Service,
then only if necessary return to an authorised S&P supplier.
IMPORTANT: Any repairs or work carried out on the appliance by person(s)
not authorised by S&P will invalidate the guarantee.
Soler & Palau reserves the right to alter specifications without prior notice.
: Press the MODE key, and using the + or
- keys, select the ANTI-FREEZE symbol, then press
the MODE key twice.
: This mode may only be programmed using the
S&P programming console, model C-440.
15