KTM Power Parts 79011955044 Instrucciones De Montaje página 9

All manuals and user guides at all-guides.com
Installing the battery compartment
- Position battery compartment
- Mount screws
- Mount screw
- Tighten screws
- Position the wiring harness and route the relevant cables toward
the bottom.
- Mount relay
- Position plug-in connector
ties.
- Plug in socket connector
- Route the cable without tension.
- Mount rollover sensor
- Secure the cable with cable ties.
- Plug socket connector
- Position diagnostics connector
- Mount control unit
- Position holding bracket
- Mount starter relay
(included) .
, but do not tighten them yet.
and tighten to 10 Nm.
.
with rubber on the bracket.
on the bracket and secure with cable
.
.
into control unit
.
on the bracket.
(included).
on the bracket and route cable.
.
9