EN
Refueling Hole Plug
Silicone Oil
Note: Pay attention to safety during refueling operations and hand is not accessible to moving parts.
9. Error Code
Fault code
Poor communication between
E01
electronic watch and
controller
E02
Explosion-proof punch
protection
Over-current protection
E05
E06
Overload protection
Keyboard and panel
E10
on-control connection
communication failure
Cause
1. Check that the connector of the electronic watch
and the controller is not connected properly.
2 . The controller plug is in poor contact and
re-plugged.
3. The controller is powered abnormally, replace the
controller.
Https://www.LikeSporting.com
1. Check that the connector of the electronic table to
the controller is not properly connected.
2.The controller master IC is in poor contact and
re-plugged.
3.The controller is powered abnormally, replace the
controller.
1.The motor is open or in poor contact, replace the
motor or check the connection terminals.
2.Power tube breakdown, replace power tube or
controller.
1.The load is heavy.
2.The running table resistance is too large, need to
oil.
3.The motor is damaged and replaced.
- 11 -
Solution