Manual heating operation (in Winter mode)
To use the Remote Control at a fixed room temperature level, press the button
, displaying the symbol (the 6 time bands
are not displayed). Then set the room temperature value by pressing the buttons
/
in 0.1°C increments. By keeping the
button pressed the temperature will change rapidly. Manual operation will be maintained until another operation mode is selected.
2.4 (Step 4) DHW - Heating temperature adjustment
Heating - Press the button
: the display shows the actual heating circuit water temperature setting, adjustable using the
buttons
/
in 1°C increments. Press any button to exit the menu.
DHW - Press the button
: the display shows the actual DHW temperature setting, adjustable using the buttons
/
in 1°C increments. Press any button to exit the menu.
EN
140
code 3541Z230 - Rev. 04 - 11/2021