Lamborghini Caloreclima CRM N Manual De Usuario página 144

Sliding Temperature - Curve parallel offset
Once the Compensation curve is set, it is possible to adjust the parallel offset of curves from 20 to 40 as shown in the following
graphs:
External temperature
1. Press the button
2. The display shows parameter CU.
3. Press the button
4. Press the buttons
pressed the value will change rapidly.
5. Press any other button to exit the menu.
EN
144
for 3 seconds.
until parameter OF is displayed.
/ to modify the parallel offset of curves in 1°C increments. By keeping the button
code 3541Z230 - Rev. 04 - 11/2021
External temperature