Product Introduction; Applications - Grundfos Liftaway C Instrucciones De Instalación Y Funcionamiento

Servicing the product
DANGER
Electric shock
Death or serious
personal injury
- Switch off the power
supply before you start
any work on the
product.
- Make sure that the
power supply cannot
be switched on
accidentally.
CAUTION
Biological hazard
Minor or moderate
personal injury
- The product will be
classified as
contaminated if it has
been used for a liquid
which is injurious to
health or toxic.
- Wear personal
protective equipment.

3. Product introduction

Grundfos Liftaway C 40-1 is a compact mini lifting
station consisting of a tank and a wastewater pump,
type Unilift KP 150 or Unilift KP 250, with level switch
for automatic start/stop. The lifting station is
designed for the pumping of wastewater from wash
basins and washing machines.
The tank has a functional design with an easy-to-
clean white surface. The tank is designed for either
wall or floor mounting. The automatic lifting station is
easy to install and provides faultless operation.
These instructions apply to the Liftaway C
40-1 tank and installation kit only.
See also the installation and operating
instructions supplied with the pump.

3.1 Applications

The Liftaway C 40-1 in combination with the Unilift
KP 150 or Unilift KP 250 is designed for the pumping
of wastewater from washbasins and washing
machines where the wastewater cannot be led
directly to the sewer due to lack of a natural
downward slope.
The Liftaway C 40-1 must not be used for
the pumping of sewage water from toilets.
If you want to connect a shower, we recommend the
Sololift+ product range.
Typical applications of lifting stations:
• Pumping of wastewater from basements below
sewer level.
• Pumping of wastewater from existing buildings so
far away from the main soil stack that a natural
slope cannot be established. This situation may
arise in connection with renovation or
modernisation.
7