Wiseup AT003 Guia Del Usuario página 5

All manuals and user guides at all-guides.com
3. Make sure your iPhone or iPad has Internet access and launch the "Camwf" APP again. If
the camera shows "Connected" on the "Devices" page, it means the remote view setup is suc-
cessful and the camera has entered into WAN mode. Now you can view live video or record
video remotely from any location.
[Note]:
If the camera shows "Connect Fail" on the "Devices" page, it means the WIFI configuration
failed and the camera will go back to P2P mode automatically in 1 minute; you need to set up all over
again.
V. Motion Detection Recording Setup
>> Please make sure that the camera is successfully added to the APP before you start.
5.1. Launch the "Camwf" APP.
5.2. Tap the gear icon on the "Devices" page and then choose "Device Settings".
5.3. On the "Device Settings"" page, choose "Alarm Record" and enable "Motion Detection"
function.
5.4. Tap "Confirm" to complete the motion detection video recording setting.
5.5. Back to the "Devices" page, tap the gear icon and choose "SDCard Record". There
you can access the video files.