Use Shoulder & Waist Harnesses; Use Armbar; Adjust Calf Support; Use Front Swivel Lock - Joie versatrax Manual De Instrucciones

Use Shoulder & Waist Harnesses
see images
-
18 23
! In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1 Shoulder harness anchor A
18
- 2 Shoulder harness anchor B
18
- 3 Slide adjuster
18
For larger child, use shoulder harness anchor A and the
highest shoulder slots. For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
22
Use slide adjuster to change the harness length.
Press the button - 2, while pulling the waist harness to
23
proper length. - 3
23

Use Armbar

see images
-
24 26

Adjust Calf Support

see images
-
27 28
The calf support has 2 positions.
To lower calf support, press the adjustment buttons on both
sides of the calf support -
27
downwards. - 2
27
To raise the calf support, push it upwards. A "click" sound
means the calf is locked completely.
25
21
- 1
23
1, and rotate the calf support

Use Front Swivel Lock

see image
29
Push up the front swivel locks to maintain the moving direction.
29
Tip
It is recommended to use swivel locks on uneven
surfaces.

Use Brake

see images
-
30 31
To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
Always set the parking brake when stroller is not moving.

Use Canopy

see images
-
32 34
The canopy can be opened completely to protect your child
from the sun uttermostly, just unzip the zip
the canopy toward front.

Adjust Handle

see image
35

Switch Seat

see images
-
36 39

Use Storage Bag

see image
40
The maximum load of Storage Bag A and B is 0.45kg.
30
31
, and then pull
33
26