Midi Operation - Beamz DMX384 Manual De Instrucciones

6.2 BLACKOUT
The BLACKOUT button brings all lighting output to 0 or off.

MIDI OPERATION

The controller will only respond to MIDI commands on the MIDI channel which it is set to full stop. All MIDI control is performed
using Note on commands. All other MIDI instructions are ignored. To stop a chase, send the blackout on note.
1) Press and hold the MIDI/ADD button for about 3
seconds.
2) Select the MIDI control channel (1~16) via the BANK
UP/DOWN buttons to set.
3) Press and hold the MIDI/ADD button for 3 seconds to
save settings.
MIDI NOTE FUNCTION (TURN ON/OFF
00 to 07 Scene 1 – 8 in bank 1
08 to 15 Scene 1 – 8 in bank 2
16 to 23 Scene 1 – 8 in bank 3
24 to 31 Scene 1 – 8 in bank 4
32 to 39 Scene 1 – 8 in bank 5
40 to 47 Scene 1 – 8 in bank 6
48 to 55 Scene 1 – 8 in bank 7
56 to 63 Scene 1 – 8 in bank 8
64 to 71 Scene 1 – 8 in bank 9
72 to 79 Scene 1 – 8 in bank 10
80 to 87 Scene 1 – 8 in bank 11
10
4) To release MIDI control, press any other button except
the BANK buttons during step 2.
Note: This is the Channel that the controller will receive
MIDI note commands.
MIDI NOTE FUNCTION (TURN ON/OFF
88 to 95 Scene 1 – 8 in bank 1
96 to 103 Scene 1 – 8 in bank 2
104 to 23 Scene 1 – 8 in bank 3
24 to 31 Scene 1 – 8 in bank 4
32 to 39 Scene 1 – 8 in bank 5
40 to 47 Scene 1 – 8 in bank 6
48 to 55 Scene 1 – 8 in bank 7
56 to 63 Scene 1 – 8 in bank 8
64 to 71 Scene 1 – 8 in bank 9
72 to 79 Scene 1 – 8 in bank 10
80 to 87 Scene 1 – 8 in bank 11