Beamz DMX384 Manual De Instrucciones página 8

4.4 EDIT CHASE (COPY BANK INTO CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Select the BANK to be copied using the BANK
UP/DOWN buttons.
4.5 EDIT CHASE (COPY SCENE INTO CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Select the BANK that contains the scene to be copied
using the BANK UP/DOWN buttons
4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button.
3) Press the TAPSYNC DISPLAY to switch the LED
display to steps view.
4) Use the BANK UP/DOWN buttons to navigate steps and
locate the insert point of the new scene. The display will
read the step number.
5) Press MIDI/ADD button to prepare the insert.
4.7 DELETE A SCENE IN A CHASE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the desired CHASE button that contains the scene
to be deleted.
3) Press the TAPSYNC/DISPLAY button to switch the LED
display to steps.
4.8 DELETE A CHASE
1) Press and hold the PROGRAM button to enter
programming mode.
2) Press the CHASE button (1~6) to be deleted.
4.9 DELETE ALL CHASE PROGRAMS
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes and program banks will
be preserved.
1) Turn OFF controller.
2) Press and hold the BANK DOWN button and the AUTO
DEL button while turning ON the controller.
8
4) Press MUSIC/BANK COPY button to prepare copy.
5) Press MIDI/ADD button to copy the bank. All LEDs will
blink.
4) Press the SCENE button that corresponds to the scene
to be copied.
5) Press MIDI/ADD button to copy the scene. All LEDs will
blink.
6) Use the BANK UP/DOWN button to locate the SCENE.
7) Press the SCENE button that corresponds to the scene
to be inserted.
8) Press MIDI/ADD button to insert the scene. All LEDs will
blink.
Notes: To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
4) Select the scene/step to be deleted using the BANK
UP/DOWN buttons.
5) Press AUTO DEL button to delete the step/scene. All
LEDs will blink.
3) Press and hold AUTO DEL button and the respective
button to delete the chase. All LEDs will blink.
3) All LEDs will blink