Service And Parts; Warranty Conditions; Technical Data - Cata G20 Manual Del Usuario

installed) checked periodically. If anomalies are found, do not repairs but have the
To ensure good performance and safety, the gas regulator taps must be greased
Periodic lubrication of the taps must only be carried out by qualified personel, who
Before leaving the factory, this appliance was tested and adjusted by specialist skilled
staff to give the best operating results. Any subsequent necessary repairs or
adjustments must be carried out with the greatest care and attention.
For this reason, we strongly advise you always to contact the Dealer who sold you the
appliance or our nearest Service Centre, specifying the nature of the problem, the
model of the equipment
number(Ser. No.). These data are provided in the plate on the cover of this manual.
You new appliance is covered by a warranty. The warranty conditions are provided in
full in the "Warranty conditions-Service centers" leaflet which you will find inside
Keep the fiscal receipt or delivery note, either of which documents your purchase of
the appliance and provides proof of date of purchase, in a safe place together with the
If the After-Sales Service is call in, show these documents to the staff. If this
procedure is not followed, the Service-Centre will have no option but to charge for
If necessary, you may find your nearest Centre by consulting the" Warranty
BURNER MAX
TYPE OUTPUT
faulty part replaced.
periodically.
must also be contacted if the appliance malfunctions.

Service and parts

(Mod.), the product number (Prod. No.) and the serial
Always request the use of original spare parts.

Warranty conditions

the appliance
any repairs.
conditions –Service centers".

Technical Data

Dimensions in mm:
Installation opening L x P
MIN
OUTPUT
leaflet.
G20
20mbar 28-30mbar
G30 G30
50mbar