Cleaning And Maintenance - Crena DF30X Manual De Instrucciones

TO REPLACE THE OIL
Make sure that the deep fryer and the oil have totally cooled
off before replacing the oil (remove the plug from the
socket!). Replace the oil regularly. This is definitely
necessary if the oil becomes dark, or takes on a different
odour. In any case, replace the oil once after every 10 times
usage. Replace the oil all at once; do no mix old and new
oil. Discarded oil is a burden to the environment. Do not
throw in the normal rubbish bin, but follow the guidelines of
the municipal waste collector in your area.

CLEANING AND MAINTENANCE

-Clean the deep fryer on both the inside and outside
regularly.
-Clean the outside of the deep fryer with a damp cloth and
dry with a soft, clean cloth.
-Never use abrasive cleaners or sponges.
-The basket and the handle can be cleaned in warm, soapy
water. Dry well before using again.
-When replacing the oil you can also clean the inside of the
deep fryer. Empty the deep fryer and first clean the inside
with a paper towel and then with a cloth dipped in soapy
water. Then wipe with a damp cloth and allow to dry
thoroughly.
-All components, with the exception of the electrical parts,
may be cleaned in warm soapy water. Dry thoroughly before
use.
-Dishwasher cleaning is not recommended.
TIPS
-Always place the deep fryer on a stable surface and keep
all flammable materials away.
-Make sure that the deep fryer is not near or on a switched-
on hot plate.
-Before you use the deep fryer it must be filled with the
required amount of oil or fat.
Never use the deep fryer without oil or fat because this
could damage the unit.
-Never move the deep fryer during use. The oil becames
very hot and you can get burned. Wait to move the deep
fryer until the oil has cooled off.