Starting Instructions - Badger WB26BCI Manual Del Operador

QUICK START GUIDE
BASIC ASSEMBLY
For detailed assembly instruction consult the assembly section of
this operators manual.
1. CONNECT SHAFTS
By removing plug & cap,
attaching the two shafts
and tightening the knob.

STARTING INSTRUCTIONS

Do not start the unit until it has been completely assembled.
Always follow these procedures when cold starting the trimmer.
1. FILL WITH 50:1 MIX
4. PULL 3-5X
Until the engine
begins to try to start.
2
2. ATTACH HANDLE
Using the bolts and
hex wrench provided.
2. MOVE CHOKE
TO START
By moving the priming lever
up to the START position.
5. MOVE CHOKE TO RUN
By moving the priming lever
down to the RUN position.
WB26BCI STRAIGHT SHAFT TRIMMER & BRUSH CUTTER
3. ATTACH GUARD
Using the bolts and
hex wrench provided.
3. PRIME ENGINE 10X
By pressing the priming
bulb beside the gas cap.
6. PULL UNTIL THE
ENGINE STARTS