Cooau CU-SPC01 Manual Del Usuario página 21

3. Distortion Correction: OFF/ON
Turn on Distortion Correction, it can correct the image distortion.
Note: You cannot select Distortion Correction when Image
Stabilization is on.Distortion Correction is disabled when you select
4K 60fps, 1080P 120fps, 720P 240fps, 720P 120fps video resolution.
4. White Balance: Auto / Sunny / cloudy / Incandescent /
Fluorescence
Default setting is Auto.
White Balance lets you adjust the color temperature cool or warm
lighting conditions. When you change this setting, the IPS display
5. Exposure Setting EV: -3 ~ +3
Default setting is 0.
By default, your camera uses the entire image to determine the
appropriate exposure level. However, EV lets you select an area that
you want the camera to prioritize when determining exposure. This
setting is particularly useful in shots where an important region might
be over- or underexposed.
When you change this setting, the IPS display immediately shows you
using the entire scene to determine the correct level of exposure.
6. Metering Mode: Average / Center / Spot / Matrix
Default setting is Average.
17