Maintenance must be carried out by competent personnel.
It is recommended that the following maintenance is carried out annually:
•
Check that all attachment screws are secure, clean and reassemble as necessary
The user should be advised:
Any changes in performance of this device must be reported to the practitioner.
Changes in performance may include:
•
Any unusual noise
•
Reduced ankle support (free movement with release button not depressed)
•
M-L movement or 'play' in pivots
The practitioner must also be informed of any changes in body weight and/or activity level.
Cleaning
Use a damp cloth and mild soap to clean the outside surfaces.
DO NOT use aggressive cleansers. Thoroughly dry before use.
Liability
The manufacturer recommends using the device only under the specified conditions and for
the intended purposes. The device must be maintained according to the instructions for use
supplied with the device. The manufacturer is not liable for damage caused by the component
combinations that were not authorized by the manufacturer.
CE Conformity
This product meets the requirements of 93/42/EEC guidelines for medical products. This product
has been classified as a Class 1 Product according to the classification criteria outlined in
Appendix IX of the guidelines. The Declaration of Conformity was therefore created by Blatchford
Products Limited with sole responsibility according to Appendix VII of the guidelines.
Warranty
Brio is warranted for 24 months.
See Blatchford website for the current full warranty statement.
The user should be aware that changes or modifications not expressly approved could void the
warranty, operating licences and exemptions.
Environmental Aspects
Where possible the components should be recycled in accordance with local waste handling
regulations.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road, Basingstoke RG22 4AH, UK.
Brio and Blatchford are registered trademarks of Blatchford Products Limited.
All manuals and user guides at all-guides.com
2
938262/3-0120