Maintenance And Troubleshooting - Tecno-gaz FOCUS Manual Del Usuario

ENGLISH
ADOZIONE DI DISPOSITIVI DI PROTEZIONE INDIVIDUALI (DPI)
INSTRUCTIONS FOR THE SAFETY OF THE OPERATOR AND THE PATIENT
The intensity of the light emitted by the polymerizing lamp can cause
irreparable damage to the retina and it is therefore necessary to wear
suitable P.P.E. (personal protective equipment) and observe some
precautions for use:
• Never look directly at the light source.
• Never point the lamp at the patient's eyes or those of any other person.
• Do not switch on the lamp until you have positioned it in the patient's
mouth.
• Do not switch on the lamp without light guide.
• Put the switch in the "OFF" position when carrying out maintenance and/or
clearing work.
• The lamp must be used exclusively by trained personnel.
• Keep out of the reach of children.
• Put the protective cap on the light guide whenever you position the hand
piece on the power supply unit.
In order to avoid injury to people and damage to property, the instructions
contained in this booklet must be followed scrupulously.
MAINTENANCE AND TROUBLESHOOTING
Cleaning and sterilising:
Clean the handpiece and base carefully with a damp cloth;
a)
b) Do not use solvents containing ethanol or acetone;
c) Do not use sharp tools that could damage or break the plastic;
Clean the cap with a clean, soft cloth. The cap can be sterilised.
d)
Battery maintenance and cleaning:
a) Do not use the battery in hot places.
b) Recharge the battery immediately before use to optimise use.
Any unauthorised intervention will be considered tampering and will lead to the
automatic forfeiture of the warranty. TECNO‐GAZ will therefore not be held liable for
any damages or injuries caused by such interventions.
16