Mounting The Compressed Air Hose Reel; Commissioning; Connecting The Compressed Air Hose Reel To A Compressed Air Source; Connecting The Compressed Air Hose Reel To A Compressed Air Tool - Parkside PDST 10 B3 Traducción Del Manual De Instrucciones Original

Manguera de aire comprimido con tambor
Ocultar thumbs Ver también para PDST 10 B3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
Mounting the compressed air
hose reel
WARNING! RISK OF INJURY!
Incorrect installation of the compressed air
hose reel can lead to injuries .
Make sure that there are no cables or pipes at
the installation site . If necessary, use a detector
or contact a specialist .
Also observe the safety instructions for the drill
that is used .
NOTE! RISK OF DAMAGE!
Incorrect installation can lead to damage .
Make sure that the support material (wall) at
the installation location is strong enough to
support the weight of the compressed air hose
reel . If you have any questions, please contact
a specialist .
1 . Use the pivoting mounting bracket 2 as a
template . You can disconnect the mounting
bracket 2 from the compressed air hose reel
after you have removed the two screws 8 by
turning them anticlockwise (see fig . C) .
Mark the position of the holes on the support
material with a pencil .
2 . Drill the holes required for mounting in the
support material .
3 . Mount the mounting bracket 2 with suitable
fixing material (see mounting accessories 0 q) .
4 . Reattach the compressed air hose reel to the
mounting bracket 2 .
To do this, screw the screws 8 that you
removed in step 1 back in clockwise (see Figure
C)
PDST 10 B3

Commissioning

Connecting the compressed air hose
reel to a compressed air source
Plug the compressed air connection 7 of the
compressed air hose reel into the quick coupling
of the compressed air source .
Connecting the compressed air hose
reel to a compressed air tool
NOTE! RISK OF DAMAGE!
Improper handling of the compressed air
hose reel can lead to damage .
Never exceed the maximum working pressure
of the compressed air hose reel and ensure that
the connectors used are compatible .
The compressed air hose can be immediately
connected to the compressed air tool via the air
inlet of the compressed air tool using the quick
coupling 6 .

Using the compressed air hose reel

WARNING! RISK OF INJURY!
The compressed air hose reel is equipped
with a return mechanism . This is operated by
a strong spring . If the compressed air hose 5
rolls up incorrectly, injuries may occur .
Never allow the compressed air hose 5 to
spring back in an uncontrolled way .
If the return mechanism is damaged, stop using
the compressed air hose reel immediately .
Have the damage repaired by a specialist .
The compressed air hose reel has a locking and
return mechanism . This makes it easy to pull out
and return the compressed air hose 5 .
GB │ IE 
 5

Publicidad

Tabla de contenido
loading

Tabla de contenido