Controls And Outlets - Westinghouse iGen1000s Manual Del Usuario

CONTROLS AND OUTLETS

# Description
1. LCD display: Display turns off after
five minutes. Quickly push the ON/
OFF button to turn ON or OFF the
display.
2. 2 USB-A output ports: Charge
devices such as an iPhone, tablet,
GoPro, speakers, etc. The USB-A
Output indicator light will illuminate
when a USB-A port is in use or turned
ON.
# Description
3. 2 USB-C output ports: Devices that
charge through a USB-C port, such
as a MacBook Pro, Android phone, or
other devices can be charged by the
iGen1000s USB-C port. The USB-C
Output icon will appear on LCD
Display when a USB port is in use.
4. DC ON/OFF button: Push and hold
to turn ON/OFF DC power. The DC
Output indicator light will illuminate
when in use or turned ON. Turning the
DC ON/OFF button to the ON position
will keep the DC power ON for 24
hours to charge low-power devices,
such as earphones, which will not
automatically turn DC power ON.
5. 2 fast charge USB-A output ports:
The USB-A Output indicator light will
illuminate when a USB-A port is in use
or turned ON. Fast charge-enabled
devices can be charged at a maximum
speed of 28W. If your device does not
support fast charging, the device will
charge at regular speed.
6. Main power ON/OFF button: Push
and hold the power button to turn
the unit ON or OFF. Quickly push the
Main Power ON/OFF button to turn
the LCD Display Screen ON or OFF
while in operation. The Power indicator
light will illuminate solid when any of
the output ports is in use. The Power
Indicator Light will flash when none of
the output ports are in use, signifying
that the unit is in an Idle State. After
five minutes in the Idle State, the LCD
Display Screen will enter sleep mode
(the battery will still be in operation).
After 30 minutes in Idle State, the unit
will automatically shut down unless the
DC ON/OFF button is turned ON.
Westinghouse Outdoor Power Equipment, LLC | 7