Publicidad
Idiomas disponibles
Idiomas disponibles
EN
To prevent reception of signals from other users, sub-channels have been
integrated.
Two radio's will only be able to communicate with each other when they are
operating on the same radio channel and when they have selected exactly the
same sub-channel. There are two kind of sub-channels:
Continuous Tone Coded Squelch System(CTCSS)
When using CTCSS, a low frequency tone (between 67 and 250Hz) will be
transmitted along with the voice signal. There are 99 available tones to choose
from. You are free to choose one of these 99 available tones. Due to ltering, these
tones will generally not be audible so they will not disturb the communication.
7. CTCSS:
• Press the MENU-button (11) twice: The current CTCSS code ashes on the display.
• Press the ▲ button (4) or the ▼ button (7) to change to another code.
• Press the TALK-button(15) to con rm and return to stand-by mode.
Note: To disable CTCSS, select code "OFF" for CTCSS in the menu. When the entry
is con rmed, "OFF" will be displayed.
8. Monitor:
You can use the monitor feature to check for weaker signals in the current
channel.
• Press and hold the MoN-button to activate channel monitoring.
• Release the MoN-button to stop channel monitoring.
Note: During channel monitoring the receiver circuit in the radios will not hear
CTCSS codes.
9. VOX Selection:
The radio is capable of voice activated (VOX) transmission. In VOX mode, the radio
will transmit a signal when it is activated by your voice or other sound around you
VOX operation is not recommended if you plan to use your radio in a noisy or
windy
environment.
Note: VOX mode will be overridden when you press the TALK-button (15)
• Press the MENU-button(11) three times, the current VOX setting ashes on the
display and the VOX icon is displayed.
• Press ▲ button (4) to set the VOX sensitivity level between 1 and 3 (level 3 is the
most sensitive level).
•Press ▼ button (7) until "OF" appears on the display, to turn VOX OFF.
• Press the TALK-button (15) to con rm and return to stand-by mode.
6
Publicidad
