Installation In A Double-Hung Sash Window - NORPOLE NPPAC8KW Manual Del Propietário

All manuals and user guides at all-guides.com

Installation in a double-hung sash window

1) Cut the foam seal (adhesive type) to the proper length
2) Attach the window slider kit to the window stool.
3) Cut the foam seal (adhesive type) to the proper length
4) Close the window sash securely against the window.
5) Cut the foam seal to an appropriate length to seal the
11
and attach to the window stool. See Fig 9.
Adjust the length of the window slider kit according to
the width of the window. Modify/cut the window slider
kit if the width of the window is less than 27". Open
the window sash and place the window slider kit on
the window stool. See Fig. 10.
and attach to the top of the window. See Fig. 11.
open gap between the top window sash and outer
window sash. See Fig. 12.