Step 1: Charging - Sensica IPL300 Manual Del Usuario

Step 1: Charging

1. Before your first use and when the battery is empty, fully
charge the battery (full charging of the battery takes up to
2.5 hours).
2. To charge your device, insert the plug of the power cord into
the electrical outlet and the other end into the device. After
charging, remove the power adapter from the wall socket and
disconnect it from your device.
3. You can use the device while it is being charged. However,
this may limit the number of pulses since battery charging
is slower than battery consumption during use.
status indicator - The indicator shows the charge status of
the battery:
Battery
Indicator Status
Light
Battery is being charged.
Red Note: if, in addition to this red light, energy level
1 is green, the device is turned on
Battery is fully charged, and the device is
Green
connected to the external power supply
Slow blinking
Low battery level (about 30% of full charge)
red light
Fast blinking
Very low battery level (about 10% of full charge)
red light
Note: The green or blinking red battery status indicators will
appear only while the device is turned on.
Battery
11