Descargar Imprimir esta página

Troubleshooting - Bresser Junior 70/900 EL Instrucciones De Uso

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 64
11. Dismantling the Telescope
Hopefully your observation session will have
been interesting and successful; afterwards, it
is recommended to store the telescope in a dry
and well-ventilated room. Please do not forget
to place the lens caps back onto the front tube
opening and the eyepiece holder. All eyepieces
and optical accessories should also be stored in
their respective containers.
TIP:
The inverting lens is not suitable for astronomi-
cal observation. Here, work with just the zenith
mirror and an eyepiece. For terrestrial observa-
tions and for viewing nature, you may use the
inverting lens with an eyepiece.
24

Troubleshooting:

Problem
No image
Fuzzy image
Focusing is not possible
Bad image
Object of observation is visible in finder,
but not in telescope
Sluggish or stiff steering of the shafts
Image is "askew," even with zenith mirror
Solution
Remove lens cap from lens opening
Adjust focus with focus adjustment knob
Wait for temperatures inside tube to balance
out (about 30 minutes)
Never observe through a pane of glass.
Align finder (see chapter 7)
Balance telescope
The eyepiece holder in the zenith mirror must
be aligned vertically

Publicidad

loading

Este manual también es adecuado para:

8845001