General Guidelines - Velleman CAMSETW10 Manual Del Usuario

9. General Guidelines

• Protect the device against water and don't put objects containing water (e.g. vases) on top of the device
•
Turn off the camera/receiver if the system is not in use.
•
Use the adapter to connect /disconnect the device with/from the mains.
•
Do not cut off the DC power cable to try and use it with a different power source
10.Specifications
Operating temperature
Storage temperature
Operating humidity
Camera
Imaging sensor
Total pixels
Viewing angle
Transmission frequency
Transmission power
Modulation type
Bandwidth
Power supply
Consumption current
Battery type
Battery capacity
Charge time
Charge consumption
Autonomy
Effective range (line of sight)
Dimensions (W x D x H)
Weight
Receiver
LCD
LCD resolution
Reception frequency
Intermediate frequency
Demodulation type
Receiving sensitivity
Power supply
Consumption current
Dimensions (W x D x H)
Weight
Channel frequency: CH1=2.414MHz; CH2=2.432MHz; CH3=2.450MHz; CH4=2.468MHz
Actual transmission range may vary according to weather, location, interference or obstacles.
The information in this manual is subject to change without prior notice.
CAMSETW10
All manuals and user guides at all-guides.com
0 to +50°C/ +32 to +122°F
-20 to +80°C/ -4 to +176°F
85%RH
CMOS
628 x 582 (PAL); 510 x 492 (NTSC)
62°
2.400 to 2.483MHz
10mW/CE; 2mW/FCC
FM
18MHz
5V DC
70mA
lithium battery (built-in)
500mAh
2 hours
350mA
5 hours
100m
66 x 23 x 23mm (without bracket)
60g
2.5" TFT
480 x 234
2.400 to 2.483MHz
480MHz
FM
≤ -80dBm
+5V DC
700mA
80 x 38 x 130mm
250g
3 VELLEMAN