Disassembling The Device; Packaging The Device; Storing The Device - Kaco blueplanet 87.0 TL3 Manual Del Usuario

Operating Instruction I
8.3

Disassembling the device

↻ Unit has been switched off and uninstalled.
1. Remove the screw that prevents the device from being lifted off the mount.
2. Use the lateral openings and lift the device off the mount.
ð Device removed. Proceed with the packaging process.
8.4

Packaging the device

↻ Device has been uninstalled.
1. If possible, always pack the device in the original packaging. If this is no longer available, an alternative is to
use equivalent packaging.
2. You must be able to close the box completely and it must be able to accommodate the weight and size of
the device.
8.5

Storing the device

CAUTION
Property damage as a result of condensation
Faulty storage can form condensate in the device and impair the device functioning (e.g. storage outside the ambient con-
ditions or temporary relocation from a cold to a hot environment).
ü Store in accordance with the technical data > Environmental data [See section 11.3}[282]
1. Prior to installation, check the inner area for condensation and if necessary, allow it to dry sufficiently before installa-
tion.
↻ Device packaged.
F Store the device at a dry location, in accordance with the ambient temperature range Environmental data [See sec-
tion 11.3}[282].
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 105 TL3 KACO blueplanet 110 TL3
KACO blueplanet 125 TL3 KACO blueplanet 137 TL3 KACO blueplanet 150 TL3 KACO blueplanet 155 TL3 KACO
blueplanet 165 TL3
General information | 1
Page 27