DreameTech Dreame Bot W10 Manual De Usuario página 25

FAQ
EN
Problem
The robot will not turn on.
The robot will not charge.
The robot will not return to the
base.
The robot is malfunctioning.
The robot is making a strange
noise.
The suction power is weak
while cleaning.
22
Solution
The battery is low. Recharge the robot on the base and try again.
The ambient temperature is too low (below 0° C) or too high (above 40° C). The operating temperature of the
robot is 0° C to 40° C.
The base is unplugged. Make sure that both ends of the power cord are plugged in.
Poor contact. Wipe the charging contacts of the base and robot.
There are obstructions around the base. Place the base in a more open area.
Wipe the signaling area of the base.
Moving the robot may cause it to re-position itself or re-map its surroundings. If the robot is too far from the
base, it might not be able to automatically return to the base, in which case you need to manually place the
robot onto the base.
Turn off the robot and then restart it.
The main brush, side brush, or main wheels may be entangled with hair or debris. Turn off the robot and remove
any hair or debris.
The dust bin is full. Empty the dust bin.
The filter is clogged. Clean the filter.
The main brush is entangled with hair or debris. Remove the hair and debris tangled around the main brush.