Use Shoulder & Waist Harnesses; Adjust Backrest; Use Brake - Joie Crosster Flex Signature Manual De Instrucciones

Use Shoulder & Waist Harnesses
see images
28
!
In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1
Shoulder harness anchor A
28
- 2
Shoulder harness anchor B
28
- 3
Slide adjuster
28
For larger child, use shoulder harness anchor A and the
highest shoulder slots. For smaller child, use shoulder harness
anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the
anchor to be level with the side facing forward. Thread it
through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
30
Use slide adjuster to change the harness length.
Press the button
proper length.

Adjust Backrest

see images
32

Use Brake

see images
34
Tip
Always apply brake when stroller is in stopped position.
Tip
Hand brake is not intended as a parking brake.
All manuals and user guides at all-guides.com
-
31
- 2, while pulling the waist harness to
31
- 3
31
-
33
-
35
29
- 1
31
26