Mlog Im50 Operating Elements And Status; Led; Mlog Im50 Status Check Via Led - Messko MLog IM50 Instrucciones De Servicio

3 Basic operation
3.4 MLog IM50 operating elements and status LED
3.5

MLog IM50 status check via LED

Funktion: Check battery status
Action
Press „ON" button
longer than
2 seconds;
than briefly press
„ON" button
Function: Check operation mode and memory status
Action
Press „ON" button
longer than 2
seconds;
than briefly press
„ON" button
BA3431002/04 ES-EN

LED

BATTERY (yellow)
5 seconds
Battery status is „Low"
flashing
Battery status is sufficient.
off A prognosis of the remaining recording duration
can be called up via MLog Analyser .
LED
ACTIVE EVENT/
(green) ALARM(red)
lights 3
off
seconds
lights 3 lights 3
seconds seconds
3 seconds
off
flashing
3 seconds 5 seconds
flashing flashing
Status LED
The start of a recording is prevented
when the battery status is weak,
but the timer recording is started
(without GPS) .
Result
Resultat
Operation mode Memory status
ready for recording Memory empty
no
recording
Recording in no alarm in Log
progress
Recording in minimum one
progress alarm in Log Book
NOTE
Suggestion
Renew
batteries
Suggestion
Read out Log
Log Book in Book via MLog
memory Analyser and
possibly delete it
Book
Check Log Book
via MLog Analyser
23