Disc, Usb And Mmc/Sd Card Operation; Load/Unload Disc, Usb Or Card - Vieta Car VC-HD900BL Manual De Usuario

9. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressing the AF button briefly,the AF switching
mode is selected and the AF switching mode is
displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS
information.
Segment flashing: AF switching mode on, but RDS
information is not received yet.
When the AF switching mode is selected, the radio
checks the signal strength of the AF all the time. The
interval of checking time of each AFs depends on
the signal strength of the current station, from a few
minute for the strong station to a few seconds for the
weak station.
Every time that a newAF is stronger than the current
station, it switches over to that frequency for very
short time, and the NEWFREQUENCY is displayed
for 1-2 seconds.
Because the mute time of theAF switching or the
checking time is very short, it is almost inaudible in
case of normal program. (When AF flash on LCD,
it will search for the stronger RDS station. If AF and
TP flash on LCD, it can only search for the traffic
announcement station).
In FM mode, when AF is on, SEEK, (SCAN), AUTO-
MEMORY function can only receive and save the
RDS program.10. Botón TA [ANUNCIO DE TRÁFICO]
10. TA [TRAFFICANNOUNCEMENT] Button
Press the TAbutton shortly to turn on TAsearch mode.
When traffic announcement is transmitted:
1). If the unit is in Disc Play mode, it will switch to
radio mode temporarily.
2). Temporarily switch over to an EON linked station
when EON detects a traffic announcement on that
other program, and TA, TP will be displayed on LCD
* TAinterruption function:
The current traffic announcement is cancelled by
pressing TA button shortly.
* When TAis on, SEEK, (SCAN), AUTO MEMORY
function can be received or saved only when traffic
programidentification code has been received.
4. Disc and USB Operation
4.1 Load/unload disc or USB
To play files in a disc or card, press the EJECT button
to slide down the monitor.
32
All manuals and user guides at all-guides.com
Then insert the disc or card into the disc slot or SD/
MMC Card slot.
To unload the disc or card, press the STOP button
twice to stop playback, then press the EJECT button
to slide down the monitor and eject disc in the disc
slot and then remove the disc; or push the card firstly
and pull it out of the card slot.
To play files in an USB, insert the USB into the USB
jack connecting to the Rear cabinet.
To unload the USB, press the STOP button twice and
then remove the USB .
In USB or CARD mode, select your desired as right.
Remark: the
is for video files; the
Tap the
icon to turn to previous setting.
icon is for audio files; the icon
icon is for image files.
icon to turn to main menu, tap the
: Tap it can pause playback
: Tap it can stop playback .
: Tapping one of them can switch on
between the speed levels of fast backward
or forward. (Except image mode.)
: Tapping one of them can select next or
previous chapter/track.
: Tap it to turn volume up and down.
: Tap it to turn the selecting page up and down.
: Tap it to select INT play mode(Except image
mode.)
: During VCD playback, tap it can select the
audio ST/MONO .
: Same as the MENU button on the remote
control.
: Same as the TITLE button on the remote
control.
: Same as the REPEAT button on the remote
control.
: Same as the SUBTITLE button on the remote
control.
RADIO DVD 7"