The Trouble Shooting - Vieta Car VC-HD900BL Manual De Usuario

Select it and enter it, then it will show a interface that
ask you to input a password,
input the password 0000 and then enter it. Then it will
tell you pair OK.
3) For some mobile phones, they can automatically
connect with the BT device of the car audio system
after pairing is ok; for some mobile phones, they
need to select the paired BT device and press the
CONNECTION button. When connection is ok, the
LCD of the car audio systemwill show LINK OK.
* when pairing is failed, press and hold the PAIR
button on the remote control to enter pairing mode,
then the LCD will display PAIR START, then pair and
connect with mobile phone again.
3. Use the mobile phone to do connection or
disconnection In the connection status, find the
paired and connected Bluetooth Device, then press
the disconnection button to do disconnection;
In the disconnection status, find the paired and
disconnected Bluetooth Device, then press the
connection button to do connection.
4. In the connection status: the audio of mobile
phone transfers to the car audio system whenever a
dialling takes place or receiving a call.
5. Dialling when in connection status
5.1 Dial with the mobile phone directly.
5.2 Dial with remote control with the following
procedures:
(1) Input telephone number with number buttons 0-9
* Press CLEAR button briefly to cancel the wrongly
input number if necessary
(2) Press TEL briefly to execute the dialling.
5.3 To redial the last phone number dialled
Press REDIAL button briefly or tap the icon
validate the last phone number.
6. Accept/Reject/End Call
6.1 When ringing, press TEL button briefly to accept
the call;
6.2 When ringing, press HANGUP button briefly to
reject the call;
6.3 When talking, press HANGUP button briefly to
end the call.
Note: During ringing, the phone number appears.
7. To transfer the audio of a file played by Mobile
Phone to the Car Audio Player
In the connection status between the Bluetooth
devices of the Car Audio Player and a Mobile Phone,
if the mobile phone can play audio or video files
40
All manuals and user guides at all-guides.com
and support A2DP, when the Mobile Phone plays
an audio or video file(For some Mobile Phones,
you must select Play by BT firstly), the audio of the
playing file will be transferred to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile
Phone support AVRCP, the
functions of the >>|, |<< , PLAY/PAUSE , EJECT,
MUTE, EQ, LOUD, + , - and SEL buttons are the
same as one in media mode(no fast forward/
backward functions for the >>|/|<< buttons). The
other buttons available in media mode are not
available.

6. The Trouble Shooting

Please read the user's manual carefully before using
the DVD player. If you have any troubles in using this
player, try to solve the problems by the suggestions
mentioned below. If you can not remove the trouble
after using all the suggestions, please contact the
company or the technical service center authorized
by us. For the sake of your safety, please do not open
the cover and repair the player by yourself, if that, it
may cause electric shock.
NOPICTURE, SOUNDAND INDICATION
* Ensure that the power switch is on.
* Ensure that the wall inlet is ok.
* Ensure that the power cord is not damaged or the
fuse is not blown.
* Ensure that the power plug is connected to the inlet
tightly.
NOSOUND BUT HAVE PICTURE
to
* Ensure that the player's audio output has a good
connection with monitor's audio input.
* Check whether the audio connector is damaged.
* Check whether you have turned down the volume.
* Ensure that you have set the right AUDIO setup of
the player.
* Ensure that the audio is not under mute.
NOPICTURE BUT HAVE SOUND
* Ensure that the player's video output has a good
connection with monitor 's video input.
* Ensure that you have turned your monitor to the AV
input channel connecting to your player.
* Check whether the video connector is damaged.
RADIO DVD 7"